App & Connection

What can I control in the app? (full overview)

· Updated · 1 min read

Quick answer

You can control: blade color, sound font, volume, light effect (hum/blaster/force/clash/lock-up/flash on clash), blade length (LED pixel count), brightness, side blade on/off, flash on clash sensitivity, power-on/power-off timing, pre-on light effect, motion control (pull-push/twist/swing) sensitivity, and firmware updates.

The main screen at a glance

  1. Connected saber card (top) — saber name, settings gear, and power button.
  2. Power circle — estimated remaining battery percentage.
  3. Font select / adjust volume — two quick-access buttons.
  4. Saber control test buttons — lock-up, drag, blaster, flash on clash, force.
  5. Color palette — preset quick colors and the full color picker.
  6. Bottom bar — Main, Settings, Customization, My Saber.

Full control list

  • Blade — color (palette or custom RGB), length (pixel count for 92 cm = 132), brightness (0-100%, default 100%), side blade on/off.
  • Sound — font select, volume slider 1-100 (no mute setting; 60-80 is the sweet spot, max may distort).
  • Light effects — hum, blaster, force, clash, lock-up, flash on clash, drag, unstable, pulse, rainbow, ghost.
  • Motion — pull-push on/off + sensitivity, twist on/off + sensitivity, swing on + sensitivity.
  • Power — power-on hold time, power-off hold time, sleep mode timing.
  • Pre-on — pre-on light effect mode and timing.
  • Flash on clash sensitivity — 24-26 is standard; higher = more sensitive.
  • Firmware — update when available.

Was this answer helpful?

Still need help? Email our sabersmiths · Send a message